4. For current measurements up to 6000 uA set the rotary
function switch to the
uA
position and insert the red test
lead into the
uA/mA
input jack.
5. Press the MODE button to select AC or DC current.
The AC “~” or DC “” symbol will appear on the LCD
display.
6. Remove power from the circuit under test, then open up
the circuit at the point where you wish to measure
current.
7. Touch the black test probe tip to the neutral side of the
circuit. Touch the red test probe tip to the “hot” side of
the circuit.
8. Apply power to the circuit.
9. Read the current on the LCD display.
www.
.com
1.800.561.8187
