THE WARRANTIES AND LIABILITIES SET FORTH
ABOVE ARE IN LIEU OF ALL OTHER WARRANTIES
AND LIABILITIES, EXPRESSED OR IMPLIED, IN LAW
OR IN FACT, INCLUDING IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR
PARTICULAR PURPOSE.
4. Contaminant
Bypass
a. Velocity of airflow is too high through unit
b. Collector plates not grounded
c. Collector cell not making solid connection to
access door and high voltage contact.
T5200 Troubleshooting Guide
The foregoing shall constitute the total liability of Seller
in the case of defective performance of all or any of the
equipment or services provided to Buyer. Buyer agrees
to accept and herby accepts the foregoing as the sole
and exclusive remedy for any breach or alleged breach
of warranty by Seller.
The troubleshooting chart, shown on the next page, will
enable the user to pinpoint the cause of most problems.
Refer to the Ordering Information for replacement parts.
Before performing any troubleshooting, ensure the
correct input line voltage is present.
VII. TROUBLESHOOTING GUIDE
IF PROBLEM CANNOT BE DETERMINED OR
CORRECTED - CONTACT YOUR LOCAL TRION
REPRESENTATIVE OR CALL TRION CUSTOMER
SERVICE AT 1-800-884-0002 FOR ASSISTANCE.
T5200 Problems and Possible Causes:
1. High Voltage Indicating Light Out
a. Power not connected
WARNING
b. Control switch “Off”
Factory designed access to all electrically charged
high voltage components contain electrical
interlocks for the safety of operating personnel.
c. Cell access door not fully closed
d. Broken cell insulator
e. Extremely dirty cells
Always unplug the unit while performing service
within the cabinet.
f.
Service panel not secured in place
2. Excessive arcing noise after washing
a. Collector elements still wet – Allow more drying
time
b. See “Continuous arcing noise” below
3. Continuous arcing noise and flickering indicating
light
a. Extremely dirty collector plates
b. Bent collector plates
c. Large piece of material lodged between cell
plates
7
