TrinityHighway.com
27
Created November 2021
STEP 10
SRT™ 31 Slot Guard Assembly
PARTS
INSTRUCTIONS
P
9960G
4 EA
1. Assemble the SRT
™
Slot Guards (Part P) as shown above, with
the arrow pointing toward Post 1.
2. Ensure the SRT
™
Slot Guards are assembled at the end of the
elongated slots of the SRT™-1 Anchor Guardrails and SRT™-2
Guardrail away from Post 1.
3. Place the SRT
™
Slot Guards against the non-traffic side of the SRT™-1
Anchor Guardrail and SRT™-2 Guardrail with the deflector angle gap
opening toward (closest to) the elongated slots.
4. Insert all bolts from the traffic side, per the diagram.
5. Assemble the nuts on non-traffic side of bolt.
6. Tighten all threaded hardware to a snug position with a minimum of two
(2) bolt threads protruding beyond the nut.
U
3360G 24 EA
BB
3340G 24 EA
Use only Trinity Highway parts that
are specified herein for the SRT™ 31
System for assembling, maintaining,
or repairing the SRT™ 31 System.
Do
not
utilize
or
otherwise
commingle parts from other systems
even if those systems are Trinity
Highway systems.
WARNINGS
Ensure the SRT
™
Slot Guards are assembled as shown above.
Failure to follow this warning could result in serious injury or death in
the event of a vehicle impact with the system.
