TrinityHighway.com
6
Created November 2021
Overview
The SRT™ 31 System is a straight flared, single-sided, re-directive, and gating end terminal. The SRT™
31 System is a 31” [787 mm] high (measured from top of rail to finished grade) end terminal used to
shield 31” [787 mm] high strong post W-beam guardrail.
The SRT™ 31 System consists of one (1) SRT
TM
Anchor Guardrail, and two (2) SRT Guardrails, Cable
Release (CR) Post at post location 1, Steel Yielding Terminal Post
®
(“SYTP
®
”) at post locations 2-6,
SRT™ Angle Strut, SRT™ Cable Anchor Bracket and SRT™ Anchor Cable, SRT™ Shelf Angle at post
2, SRT™ Flange Protector at posts 2, 4, & 6, SRT
TM
Slot Guards downstream of slots, SRT™ Buffer,
and various other required hardware accessories
.
The CR Post 1 Bottom is fabricated from a W6x15# Structural Beam approximately 6’-3 1/2” [1.91 m] in
length from top of the side plates to bottom of the embedded portion. Combined with the CR Post 1 Top,
they become the SRT
TM
Anchor Post shown below.
SRT™ System (34’-4 1/2” Long - 31” High)
Reference drawing: SS436
