Trilithic Model One Operation Manual Download

Page: 67 / 76

Model One Operating Manual

""!

TRILITHIC

64 –

When you are satisfied with the status of
the file’s information, press

(SAVE).

The Model One saves the file and then
returns to the initial SAVE screen.

The new file’s date and time appears next
to the file number.

Loading Data

The Model One enables you to load data
you have saved previously.

Press

LOAD

Press

and

to scroll to the desired

file. You may also scroll in screen blocks
using the

and

DOWN

arrow buttons on

the key pad.

Advanced Operation

19:16:30

SAVE

ENTER

NAME

DATE

TIME

FILE0

12/07/00

13:15

FILE1

12/07/00

13:30

FILE2

13/07/00

10:12

FILE3

13/07/00

11:16

FILE4

14/07/00

09:29

FILE5

14/07/00

14:18

FILE6
FILE7

19:16:30

LOAD

ENTER

NAME

DATE

TIME

FILE0

12/07/00

13:15

FILE1

12/07/00

13:30

FILE2

13/07/00

10:12

FILE3

13/07/00

11:16

FILE4

14/07/00

09:29

FILE5

14/07/00

14:18

FILE6
FILE7

Summary of Contents for Model One













































































Search results

Summary of Contents for Model One

Reviews:

Related manuals for Model One

Brands by name

Popular brands

Trilithic Model One, Operation Manual

Search results

Summary of Contents for Model One

Reviews:

Related manuals for Model One

Brands by name

Popular brands