Trilithic Model One Operation Manual Download Page 28

Page: 28 / 76

TRILITHIC

Model One Operating Manual

– 25

Use

to scroll to SCAN ENABLED.

Use

toggle

this parameter between

ON and OFF (YES or NO).

TRANSMISSION

Scroll to TRANSMISSION and press

toggle

the parameter between enabled

and disabled (YES or NO). Use this
parameter to test for transmission charac-
teristics and loss of in-between connec-
tions in your CATV system.

LIMIT SETUP

Scroll to this parameter to set the limits of
the meter so that you can conduct limit
tests. Press

to enter the LIMITS

display. Here, you can select the LIMIT
DISPLAY and edit the limits.

You can display the limit lines and a
PASS/FAIL indication for each channel
and the viewable scan spectrum, during
channel spectrum scanning. Limits are
not used to determine Pass or Fail for
SGNL and DIGI type channels (see

Channel Spectrum Scanning Measure-
ment

page 44). To enable or disable this

function, scroll to LIMIT DISPLAY and then
press

toggle

the function from off to

on (NO to YES).

Model One Setup

19:16:30

SETUP

MEASUREMENTS

ENTER

LIMIT SETUP

LIMIT DISPLAY

EDIT LIMIT
PRIOR MENU

Summary of Contents for Model One













































































Search results

Summary of Contents for Model One

Reviews:

Related manuals for Model One

Brands by name

Popular brands

Trilithic Model One, Operation Manual

Search results

Summary of Contents for Model One

Reviews:

Related manuals for Model One

Brands by name

Popular brands