Trikke Owner’s Manual 6/5/07
7
Step 3: Attaching the Front Fork
Putting the front fork on in the proper
riding position requires a 5mm Hex wrench
(supplied). First, turn the vehicle upside down
so the fork post
(arrow right)
is aiming towards
the sky. You should do this procedure on a
carpet or soft surface to prevent scratching the
handlebars or foot platforms.
Inspecting the fork post you will find a spring loaded locking
pin
(arrows above and left)
. You will also find a hole to secure the
locking pin on the front face of the fork.
Simply align the locking pin with the hole
(arrow right)
and
push the front fork onto the fork post until the top of the fork
and the locking pin meet.
Depress the locking pin and slide the fork the final inch or so
until the locking pin snaps into the hole
(arrow left)
.
Now all you need to do is use the 5mm Hex wrench to
firmly
tighten the two bolts
(arrow right)
.
Leave the vehicle upside down for the next step.
