Trikke Owner’s Manual 6/5/07
10
Final Assembly Check List for All Models
1. When you think that you have completed the assembly process, study the vehicle
one more time and compare it to the photograph on page 4.
2. Check the bolts that secure the front fork and handlebars. A good push and pull
on the handlebars will immediately indicate whether or not the stem plate is not
properly secured. The handlebars should not be able to rotate on the stem --- even
with all of your weight pushing on it.
3. Do a final brake check by spinning both rear wheels. They should spin freely
until you apply the brakes. You should be able to vigorously squeeze the brake
levers without the levers depressing all the way to the handlebar.
4. Check the folding mechanism to insure that both of the rear legs are locked in
the riding position.
5. Always check all of the bolts before riding to insure that the vehicle and all of
its components are operating properly.
Assembly Questions or Replacement Parts
For any questions regarding your Trikke replacement parts or accessories, please go to the
www.trikke.com website for further details.
Caution!
Before riding for the first time, please take several minutes
to go over the Important Riding and Safety Tips on page 2
and 3 of this manual.
For the safety of friends and others who will try your new
Trikke product, it’s your responsibility to coach them
about safe riding. Make sure they read and understand all
warnings and safety information in this owner’s manual
before riding.
Tire pressure affects the riding performance:
lower pressure makes for a smooth
but slower ride, higher pressure makes for a faster but slightly bumpier ride. Check tire
pressurre once a week - use a tire gauge. Do not ride with low pressure as this can damage
the tires and pose more risk of falling.
Converting your T78cs to All Air Ride:
You can easily convert your T78cs to an All Air Ride. T8 Air wheel sets are avilable at
www.trikke.com.
