Trikke Colt Owner’s Manual - V0 11/18/14 -
page 15
Once the ba ery is switched ON, the lights on the thro le will light
up indica ng the level of charge of the ba ery: full/half/low,
meaning that the vehicle is ready to work. Gently twist the thro le
grip backwards and the front wheel will start the movement of the
vehicle. Control the amount of power to the motor by twis ng the
thro le back to increase power and returning it to decrease power.
If vehicle is le ON and inac ve for over 5 minutes, the system will
me out and shut OFF (to save energy). Even with the ba ery
switched ON (red light on the ba ery ON), the thro le lights will
turn OFF when system is med out, and there won't be power
delivered to the motor when twis ng the thro le. You will need to
reset the power by switching OFF and back ON to start the system.
When climbing inclines, if the speed becomes too slow (below
walking speed), it indicates that the load is too heavy for the motor.
Do not insist in riding in this condi on as the motor will heat up and
possibly get damaged. Try helping the motor by tackling the hill with
side to side movements of the front wheel. Avoid any condi on
where the motor stalls under thro le.
In stall or overload condi on the fuse may trip (the circuit will break
and turn OFF the power from the ba ery to the system). You will
have to wait for a while to allow the system to cool down and push
in the fuse bu on to reset it.
When the charger is plugged to the wall outlet (120V) and
connected to the ba ery, the status light will be lit RED indica ng
that the ba ery is charging up. When the ba ery becomes fully
charged, the status light will turn GREEN.
Charger
Riding With Electric Power