2.2
Set-up Recommendations
After unpacking the unit, examine the device first for possible transport damage. If you
should determine damage has occurred, then immediately contact your dealer. Next,
examine the contents of the container to ensure all components are present. You should
find, addition to the
RECALL II,
the following:
- Mains cable
TRIGON VOLT
- IR remote control
DIRECTOR
- Operating instructions
RECALL II
- Warranty requirement certificate
Set up the device horizontally in a dry place. Ensure good ventilation. Strong magnetic
scattering fields, which are caused by output stage transformers and halogen light
transformers, can lead to stray humming effects. Therefore set up the CD Player some
distance from such devices. Also, do not lay the cable connections parallel to the lighting
leads.
Stray humming effects are also produced from fluorescent lamps, so keep a minimum
distance of approximately 1m. Avoid direct sunlight and don’t set up the
RECALL II
close to strong heat sources.
2.3
Guarantees and Service
The
RECALL II
is a high-quality and sophisticated product. We at
TRIGON
try to
ensure the demands made of a
TRIGON
-product are met via numerous quality tests
and strict goods control. If a problem should however occur, then
TRIGON
ELEKTRONIK GmbH
grants a 3-years warranty. The warranty includes the repair
of the defective part as well as any labor charges. This is the limit of liability.
The warranty excludes any damage which resulted from inappropriate installation,
incorrect operation or repairs through unauthorized specialist dealers and private
individuals. Further the warranty is void with disguised serial numbers as well as when
damage occurs as a result of accident or transport damages.
3.
Start-up
After unpacking the CD Players, we recommend you first connect and switch on the device
with electricity to the un it only, without having first connected it to other devices.
After a short switching on phase (the operating display LED [ 5 ] flashes) you hear a low
clicking of a relay. The
RECALL II
is now ready for use. You should now make
yourself somewhat familiar with the controls and the female connectors.