2.1
Safety notices.
TRIGON ELEKTRONIK
assumes no liability for damage, which result from
inappropriate handling and/or disregard for the following safety instructions.
The CD-player may not be placed close to strong heat sources such as heating elements,
furnaces, high-powered lamps, open fires, etc.
The CD-player may not be exposed to strong impacts and vibrations.
The CD-player may not be connected to the power outlet immediate after being brought
from a cold environment to a warm one. Condensation could damage the device. Wait a
few minutes until the device is warmed up to room temperature.
The CD-player should not be exposed to direct sunlight.
Please ensure that the device gets sufficient ventilation at its installation location.
Don’t pour fluid on the CD-player; the inside of the device must remain dry.
Never activate the device without having the protective casing in place.
Always remove the power plug from the socket before opening the device.
Never bridge the fuse. Please replace a defective fuse only with an original fuse of the
same type and rating.
Never attempt repairs on your own. Only authorized, properly trained technical personnel
may undertake any maintenance and/or repair. Any damage that results from improper
handling or unauthorized repair attempts will void any possible warranty claim.
Please always turn off your system’s device before changing and/or attaching cables.
The
RECALL II
can operate at a voltage between 180V and 250V, 230V is the
average. If another voltage is required, please contact your dealer or
TRIGON
,
so that
the device can be retrofitted.