Key
PAUSE
If the CD-Player is in render style, the rendition can be stopped by using the function of
break. By using the key START the Pause is cancelled and the rendition can be continued
(Also described under
[ 9 ]
.)
Key
START
The rendition can be started with this key.
Key
STOP
The rendition is stopped with this key. It is also used to delete a program selected in the
program mode.
Keys
VOL – and VOL+
These keys do not control any functionalities of
Recall II
Recall II
Recall II
Recall II
. However, they will control
the volume of a connected
Trigon
Trigon
Trigon
Trigon
Amplifier, without switching the Director to the
Amplifier
device.
4.
What to do, if...
In this chapter we want to give you a few hints, which will help to resolve smaller problems.
4.1 ... nothing works?
Is the power supply plug inserted correctly? - Put the power supply plugs firmly into the
plug socket.
Does the mains voltage rest against the used main plug socket, or has the home fuse
maybe reacted? – Examine the home fuse.
Did the internal micro fuse burn through? – Return the device back for service.
4.2
... one hears nothing?
Is the correct entrance at the amplifier selected? - Select the correct entrance.
Does the
RECALL II
supply at all a signal? – Attach the
RECALL II
to another
entrance and examine if it functions. If this is the case, something is wrong with the other
entrance of the amplifier. - Examine the entrance of the preamplifier.
Was a computer data CD inadvertently inserted? – Insert an audio CD.
Did the
RECALL II
read the CD correctly? – If the player cannot read the CD, it tries
to read the data in anyway. If it isn’t successful, the message “NO disc or 00 0000”appears
in the display. The CD is either defective or badly scratched and/or dirty. - Use a new CD.