51 Notice N°880 107 Rev A
8 - Assembly of Straps, rail guides and pressure plates
Make sure that the ground has been carefully levelled before laying the straps.
These straps must be
laid flat on the ground.
If the pool is installed on a concrete surface, spaces should be reserved for bolts to hold the straps.
Holes of 18mm in diameter should suffice.
IMPORTANT!
When assembling, insert the bolts through the top and screw-on the nuts from underneath.
One bolt is provided for each hole.
Before proceeding to assemble the lower rails in the rounded parts of the pool, lay-out the wall within
the pool.
