manualshive.com logo in svg

Tridonic QLE G2 PRE, Technical Manual

Share
Download
Tridonic QLE G2 PRE Technical Manual Download Page 17

Technical Design-in Guide Engine QLE G2 PRE KIT | 01-2019 | 1.0 | en

Mechanical Aspects

c

17 / 64

Installation details

Depending on the particular situation, the LED Driver can be installed in the luminaire casing (in-built) or outside the casing (remote).

Terminals with push button for quick and easy wiring.

Perfectly uniform light, even if several LED modules are used together.

Beveled edges for discreet wiring and easy installation.

4.1.2. Notes on installation

Depending on the installation situation for the LED Driver and the modules, the following requirements must be met:

Protection measures against damage

Mechanical stress
QLE G2 PRE modules contain electronic components that are sensitive to mechanical stress. Such stress should be kept to an absolute
minimum. In particular the following mechanical stresses should be avoided as these may cause irreversible damage:

Adequate distance from insulating materials

_

Adequate strain relief for closed covering on the LED Driver

_

Adequate cooling of the modules (the maximum temperature at the t  point must not be exceeded)

p

_

Unrestricted exit of light from the modules

_

Pressure

_

Summary of Contents for QLE G2 PRE

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands