Operation
DALI XC_IB 3.0 | 01.2014 | en
22
8.1.2 Double momentary-action switch control
Requirement:
– DALI XC must be in
GC-A
,
GC
or
TuWh
operating mode.
i
Note
If the DALI XC is in
TuWh
operating mode, the intensity of the assigned group can only be changed with
the double momentary-action switch connected to input T1 and T2.
Switching on lighting
Briefly press double momentary-action switch .
The group assigned to the momentary-action switch is switched on.
The colour temperature of the Tunable White luminaires in the group is set to the last saved value.
Switching off lighting
Briefly press double momentary-action switch .
The group assigned to the momentary-action switch is switched off.
Brightening lighting
Hold down double momentary-action switch .
The group assigned to the momentary-action switch is brightened.
The colour temperature of the Tunable White luminaires in the assigned group stays the same.
Dimming lighting
Hold down double momentary-action switch .
The group assigned to the momentary-action switch is dimmed.
The colour temperature of the Tunable White luminaires in the assigned group stays the same.
Summary of Contents for LuxControl DALI XC
Page 1: ...luxCONTROL DALI XC ...
