•
Use only the brush supplied with the machine or those specified in the following manual.
Using other brushes compromises the safety of the machine and its operator.
• Before starting work check that there are no leaks.
• Before starting work check that all the safety devices have been installed and are working
correctly.
• Take all due precautions so that hair, jewellery, loose clothing do not get entangled in the
machine's moving parts.
• Only use the machine in well-lit areas.
WARNING:
• Always protect the machine against sunlight, rain, and other atmospheric agents, both while it
is stationary and while it is in function. Store the machine in a dry, sheltered place: this machine
is only designed for use under dry conditions, and must not be used or stored outdoors under
humid conditions.
• Do not park the machine near combustible materials, powders, gases or liquids.
•
Stop the machine on flat ground.
•
Switch off the machine and remove the battery from the battery compartment.
• If the machine is left unattended, it must be protected from any accidental movements
CAUTION:
• In order to prevent the unauthorised use of the machine, the power supply must be interrupted,
switch the machine off using the main switch, remove the battery from the battery compartment.
ATTENTION:
• The machine must only be stored under temperature conditions ranging from 32°F to +104°F.
The humidity level must be between 30% and 95%.
DEACTIVATION OF THE MACHINE
DANGER:
• In order to avoid short-circuits when working in the vicinity of electrical components, do the
following: avoid the use of non-insulated tools; do not place or allow metallic objects to fall
upon the electrically powered components; remove any rings, watches and/or clothing with
metallic parts that might come into contact with the electrically powered components.
WARNING:
• Read all the relevant instructions carefully before performing any maintenance/repair
operations.
• If the machine does not work properly, check this is not caused by failure to carry out routine
maintenance. Otherwise, ask for intervention of the authorised technical assistance centre.
MAINTENANCE
The machine must not be transported or parked in its rest position
when the solution tank and recovery tank are full.
6