Trident iON, Instruction Manual

Page: 5 / 13

5
The On/Off power switch is located at the rear of the Control Box. When pressed in the ON
position the display on the Control Box lights up and says: HELLO.
SELECTING MICROMOTOR PARAMETERS
Upon initially turning the iON ON, the display on the front panel of the Control Box says:
HELLO.
After a few seconds the display will indicate the direction of the Motor’s rotation:
Forward > or < Reverse.
The display will then show the rpm, as well as motor rotation: F (forward) or R (reverse).
Motor rotation can be changed anytime by pressing the direction key on the front panel.
ACTIVE KEYS
By depressing the MODE key you can select whether to run the Micromotor at a Variable
Speed or at a Constant Speed. The display will show you which Mode you selected.

Variable Speed - By pressing down on the Foot Pedal you control the speed of the
motor from a minimum of 1000 rpm to a maximum speed that you select…and all
points in between. (The next section will instruct you on how to select the desired