Trident 88 Owner'S Manual Download Page 14

Page: 14 / 40

Trident 88

Owners Manual

Trident 88

Group AUX Sends

AUX 2 Level Control

Adjusts the mix level of Monitor Input

into the Aux 2 bus.

AUX 5-6 PAN Control

Adjusts the balance of the Monitor sig-

nal being fed to Aux 5 bus (CCW) and

Aux 6 bus (CW). In the centre (=) po-

sition equal signal level is sent to both

Aux 5 and Aux 6 buses.

AUX 1 Pre Switch

This switch determines the signal
source for Aux 1 bus, between Post
(UP) or Pre (DOWN) Monitor Level.

AUX 1 Level Control

Adjusts the mix level of Monitor Input

into the Aux 1 bus.

AUX 3 Level Control

Adjusts the mix level of Monitor Input

into the Aux 3 bus.

AUX 4 Level Control

Adjusts the mix level of Monitor Input

into the Aux 4 bus.

AUX 5-6 Level Control

Adjusts the mix level of Monitor Input

into the Aux 5 and Aux 6 buses.

AUX 7-8 PAN Control

Adjusts the balance of the Monitor sig-

nal being fed to Aux 7 bus (CCW) and

Aux 8 bus (CW). In the centre (=) po-

sition equal signal level is sent to both

Aux 7 and Aux 8 buses.

AUX 7-8 Level Control

Adjusts the stereo mix level of Monitor

Input into the Aux 7 and Aux 8 buses.

AUX 2 Pre Switch

This switch determines the signal
source for Aux 2 bus, between Post
(UP) or Pre (DOWN) Monitor Level.

AUX 3 Pre Switch

This switch determines the signal
source for Aux 3 bus, between Post
(UP) or Pre (DOWN) Monitor Level.

AUX 4 Pre Switch

This switch determines the signal
source for Aux 4 bus, between Post
(UP) or Pre (DOWN) Monitor Level.

AUX 5-6 Pre Switch

This  switch  determines  the  signal
source  for  Aux  5  and  Aux  6  buses,
between  Post  (UP)  or  Pre  (DOWN)
Monitor Level.

AUX 7-8 Pre Switch

This  switch  determines  the  signal
source  for  Aux  7  and  Aux  8  buses,
between  Post  (UP)  or  Pre  (DOWN)
Monitor Level.

Summary of Contents for 88









































Search results

Summary of Contents for 88

Reviews:

Related manuals for 88

Brands by name

Popular brands

Trident 88, Owner'S Manual

Search results

Summary of Contents for 88

Reviews:

Related manuals for 88

Brands by name

Popular brands