Trident 88 Owner'S Manual Download Page 12 | Manualshive

Page: 12 / 40

Trident 88 Owner'S Manual Download Page 12

Trident 88

Owners Manual

12

Trident 88

Group Monitor Section

AUX 7-8 PAN Control

Adjusts the balance of the stereo Ef-

fects Return signal being fed to Aux 7

bus and Aux 8 bus. In the centre (=)

position the left stereo signal is fed

to Aux 7 (pre Level control) and the

right signal is fed to Aux 8 (pre Level

control) and both are attenuated by

3dB. With the balance control fully

anticlockwise, the left

Eff

ects Return

signal is fed unattenuated to Aux 7

(pre Level control) and the right sig-

nal is fed fully attenuated to Aux 8

(pre Level control) With the balance

control fully clockwise, the left Ef-

fects Return signal is fed fully attenu-

ated to Aux 7 (pre Level control) and

the right signal is fed unattenuated to

Aux 8 (pre Level control).

EFX To AUX

AUX 7-8 Level Control

Adjusts the stereo mix level of

Eff

ects

Return into the Aux 7 and Aux 8 buses.

MON SOURCE

This switch determines the signal
source to the Group Monitor section;
additionally it displays the signal
shown on the bargraph meter above.

In  the  UP  position  the  signal  fed  to
the  Group  Monitor  section  and  bar-
graph  meter  is  the  Group  output.
When depressed (DOWN) the signal
fed  is  derived  from  the  associated
rear MONITOR RETURN TRS jack.

AUX TO MTR

Pressing this switch assigns the asso-
ciated Aux output (post the Aux Mas-
ter Level on the Master module) to the
bargraph meter above. This allows the
user to check Auxiliary output signal
levels from the console on the meter.
Note: when this switch is pressed the
Auxiliary signal sourced to the bar-
graph meter overrides any other signal
to the bargraph selected by the MON
SOURCE above. The switch combina-
tions below explain the various signal
fl ws:

MON SOURCE (UP) - AUX to MTR
(UP) – Associated Group output feeds
monitor section and also the bargraph.

MON SOURCE (UP) - AUX to MTR
(DOWN) – Associated Group output
feeds monitor section. Associated Aux
Output feeds bargraph.

MON SOURCE (DOWN) - AUX to MTR
(UP) – Associated Monitor Return TRS
feeds monitor section and also the bar-
graph.

MON SOURCE (DOWN) - AUX to MTR
(DOWN) – Associated Monitor Return
TRS feeds monitor section. Associated
Aux output feeds bargraph.

EFX To AUX

AUX 7-8 Pre Switch

This switch determines the signal
source for Aux 7 and Aux 8 buses,
between Post (Up) or Pre (Down) Ef-
fects Return level.

12-Segment

Bargraph Meter

Displays one of 3 sources as deter-

mined by the switches below (MON

SOURCE and AUX TO MTR). The me-

ter is a peak responding meter with

a fast attack and slower release. It is

very useful when used with complex

dynamic waveforms, able to display

sharp transient responses and greatly

assist the engineer when it comes to

avoiding distortion during recording.

«
...
10
11
12
13
14
...
»

Summary of Contents for 88









































Reviews:

No comments