Trident 88
Owners Manual
15
Trident 88
Group EQ
EQ IN
This switch inserts the 2-band EQ
into the
Eff
ects Return signal path.
When not in use, it is suggested that
the EQ be kept in the OUT position
for best phase performance.
LOW Frequency
Section – Shelving
Adjusts the low frequency shelving
EQ response. The corner frequency
of the shelving fil er is 80 Hz and the
Level control adjusts the cut/boost
between +/- 15dB. The centre “0”
position of the Level control has a
detent to indicate that it is having no
eff
ect on the associated channel sig-
nal. Cut or boost of the low frequency
level control is usually used for minor
tonal adjustments.
MONITOR
LEVEL Control
Adjusts the Monitor input signal level
to the Left/Right bus.
HIGH Frequency
Section – Shelving
Adjusts the high frequency shelving
EQ response. The corner frequency
of the shelving fil er is 12 kHz and the
Level control adjusts the cut/boost
b/- 15dB. The centre “0” po-
sition of the Level control has a detent
to indicate that it is having no
eff
ect
on the associated channel signal. Cut
or boost of the high frequency level
control is usually used for minor tonal
adjustments.
MONITOR
PAN Control
This control blends the Monitor Input
post-level/post mute signal between
the Left and Right buses. When at the
centre detented position, both sides
are fed equal amounts of signal (each
down by 3dB).
MONITOR
FADER REVERSE
When depressed, swaps the Monitor
Level control with the Group fader
control. The Monitor signal level to
the Left/Right bus is now controlled
by the Group fader, additionally the
Group output level is now controlled
by the Monitor Level Control. Note:
SOLO and Mute functions below re-
main with the Monitor signal path.
MONITOR SOLO (AFL)
When pressed, routes the Monitor
signal (post Level and Pan) signal to
the Solo bus. Additionally this switch-
es the Main Monitor output (normally
feeding the Left/Right mix) to source
the signal from the AFL/PFL Master
Level in the Master section as well as
to trigger LED indicators in the Mas-
ter section and meter-bridge stating
a Solo button has been pressed.
MONITOR MUTE
When pressed will mute the Monitor
input signal to the Left/Right bus. It
is recommended when the Monitor
section is not being used, that it be
muted.
Trident 88
Group AUX Sends
Summary of Contents for 88
