v
Safety Summary
The following are general safety precautions that are not related to specific procedures. These
precautions do not appear elsewhere in this manual. You must read and understand these
precautions before replacing, disassembling, or performing maintenance on the TCR-HHR-02
Tactical Repeater System.
DO NOT SERVICE OR ADJUST ALONE
Maintenance and operating personnel should not perform electrical or power measurements,
power-up, or servicing without the immediate presence of another person capable of rendering
aid.
RESUSCITATION
Personnel working with or near high voltages shall be familiar with the methods of artificial
respiration.
STANDARD GOOD PRACTICES
Personnel shall observe all standard practices when installing, replacing, operating, and testing
equipment (i.e., dry hands and clothing, remove personal jewelry, use rubber mats and other
insulating devices, etc.).
WARNING
Incorrect reassembly may result in a risk of electric shock or fire. To reduce risk
of electric shock, unplug the unit from outlet before attempting any maintenance
or cleaning. Turning off controls will not reduce this risk.
CAUTION
Use of an attachment not recommended or sold by the manufacturer may result in
risk of fire, electric shock, or personal injury.
To reduce risk of damage to electric plug or cord, pull by plug rather than cord
when disconnecting TCR-HHR-02.
Make sure cords are positioned so that they will not be stepped on, tripped over,
or otherwise subjected to damage or stress.
Do not operate the unit with damaged cable or connector. Replace damaged
cables or connectors immediately.
Do not operate the unit if it has received a sharp blow, been dropped, or otherwise
damaged in anyway; take it to a qualified serviceman.
Do not disassemble the unit; take the unit to a qualified serviceman when service
or repair is required.