FEATURES – FUNCTION
FUNCTION
BUTTON
DESCRIPTION
SET DISPENSING
PERIOD
Select one of the six different dispensing rates (1M,
2M, 3M, 6M, 12M and Half Month)
The dispensing rate can be changed during
operation.
POWER ON/OFF
Depress the button for 2 seconds to turn unit on
and off.
Default setting is 1 Month using the 125cc pouch.
GREASE VOLUME
SELECTION
Select the volume of grease pouch (125cc/250cc).
TEST
MODE
The test function is provided to confirm that the unit
works prior to installation or after replacement of
service pack. In addition, the test function is provided
for troubleshooting purposes if the motor has been
overloaded.
IMPORTANT :
To activate TEST MODE, depress the button for 2
seconds. “tst” should start blinking and an audible
gear mesh sound will confirm unit operation and a
grease discharge should be observed. If the unit
does not operate in Test Mode, it should be returned
to your supplier.
To deactivate TEST MODE, depress the button. The
unit will then stop functioning in TEST MODE within 20
seconds. Otherwise, the unit will automatically stop
TEST MODE after 2 minutes and be back to previous
mode set.
RESET
RESET
Use when service pack is replaced.
Use to reset unit back to its default setting
following ;
- Abnormal display on LCD screen.
- A unit malfunction or when the Power ON/OFF
button is not available.
CAUTION!
Depressing RESET will
eliminate
all previous
settings and records.
WARNING LAMP
RED LED
For Low battery power, Motor overload, or Low grease
level, the red LED will blink periodically.
NOTE:
Whenever any function is selected, the red LED should blink once only.
Page 6/11
