www.tricklestar.com
AV Advanced Pow
Before First Use
Step 2
Step 1
< tv >
CHANNEL
1
CHANNEL
2
CHANNEL
3
CHANNEL
4
Press any button but the power
button on your Infrared (IR) remote.
The multi-sensor should blink red
once and then the switched outlets
should have power.
You'll know the switched outlets
have power when the green
switched LED at the top of the power
strip is lit.
Note: Not all remotes are IR. Please
make sure you're using an IR remote
in this step.
This APS+ features auto-threshold sensing technology. This learns the normal
power draw of your TV, known as a power profile. After setup, you need to teach
the APS+ the power profile of your TV.
Turn on your TV. Let it come to full
brightness. Use the IR remote to
change channels. The sensor should
blink red each time you press your
IR remote.
Turn the TV off. Wait for the switched outlets to turn off, which should take
about a minute.
You'll know they are off when the green "switched" LED indicator at the top of
the strip is no longer lit. While the TV is turning off, the sensor should blink
red and blue.
Now the APS+ has learned the power profile of your TV and you can use it.
Step 3
TV OFF
always on
cable box
dvr
surge
ground
switched
sensor
