www.tricklestar.com
AV Advanced Pow
4
5
6
7
8
9
1
2
3
IR & Motion Multi-Sensor
The multi-sensor connects to the powerstrip via the RJ11 port marked
“sensor.”
Power Connection
The Advanced Pow (APS+) must be plugged into a grounded
outlet to be properly surge protected. Use of an extension cord, adaptor
or other powerstrip in conjunction with the APS+ will void all warranties.
Sensor/RJ11 Port
Plug the multi-sensor into this port. There will be a soft, audible “click”
when the connector is inserted correctly.
Surge LED
When illuminated, it indicates that the surge protection is functioning
normally. If this LED does not illuminate, it indicates that the surge
protection function has been damaged while protecting your devices,
and the product must be replaced.
Ground LED
When illuminated, it indicates that the APS+ is correctly grounded.
If not illuminated, there is a grounding problem and you must contact an
electrician to properly ground the socket. Surge protection will not work
with an improperly-grounded outlet.
Switched LED
When illuminated, it indicates that the switched outlets have power and
devices plugged into them can be used.
Resettable Circuit Breaker
If the surge, ground, and switched LEDs are not illuminated and/or
electronics plugged into the APS+ won't turn on, press the circuit
breaker to manually activate power.
Always-on Outlets
Electronics that require continuous power should be plugged into the
always-on outlets.
< tv > Outlet
The outlet marked < tv > is the control outlet.
IMPORTANT: THE TV MUST BE PLUGGED INTO THIS OUTLET
Switched Outlets
If the TV is turned off or there is no IR remote activity or motion
detected, the devices plugged into these outlets will automatically turn
off.
TAV-Link Cable (sold separately)
TAV-Link sends high-level CEC commands to certain HDMI connected
devices, allowing them to safely store their data and settings prior to
powering down.
10
11
11
4 5 6
7
9
8
1
2
3
10
Product Overview
