UPM 1400
EN
14
Satellite, packet control: satellite list
With the packet check function received on the TPs, all stored transponders of a respective satellite are measured
and evaluated one after the other. By evaluating over a longer period of time, for example, errors can be determined
that only occur sporadically.
The following figure shows the list of satellites as the first selection item in the TP control menu
Select the corresponding satellite on which you want to perform your measurement.
The settings that can be made here, have already been explained in section 5.1.
Satellite, TP control: parameters and functions
After selecting the satellite, the measuring device starts to evaluate the corresponding transponder.
The DiSEqC port and LNB type can be selected and changed using the cursor keys.
Press the OK button to open a list, select your configuration.
Explanation of parameters:
10832
= Transponder Frequency
H
= Polarization
22000
= Symbolrate
S
:
84 dBuV
= Signal Level
Q
:
12.1 dB
= Signal Quality (MER)
2.24E
-
… = Signal quality (CBER)
Function Key Options
:
F1 - restarts the control and the device starts scanning again
F2 - saves the analysed values over an individual time period to a USB storage medium
F3 - scans transponders for 1 hour and saves results to USB storage
F4 - scans transponders for 24 hours and saves results to USB storage
Summary of Contents for UPM 1400
Page 3: ...UPM 1400 3 EN ...
Page 32: ...UPM 1400 EN 32 Notes ...
