![background image](http://html1.mh-extra.com/html/triax/tdch-16s-i/tdch-16s-i_user-manual_1160872050.webp)
TDcH Compact Headend
EN
50
NIT STANDARD
Select which standard you want to use, DVB or NorDig. By default DVB is selected.
Static NIT version (
“Freeze” NIT
)
If programs of a transponder change, then the NIT is recreated. In most countries, the end user does not notice,
because the receivers automatically read in the new NIT. However, in some countries (eg France) end users are asked
to start a channel search.
If it comes to the case that one or more stations are weak to receive, then the NIT changes frequently and the end
users are always unnecessarily prompted to start a channel search. In this case, the NIT version can be "frozen"
(recommended for use in France).
Under
“Static NIT version” e
nter a version between 1 and 31.
Note:
If the station list really changes, the channel search must be done manually.
EIT (EPG Management)
The Event Information Table (EIT) dropdown list enables you
to change the EIT settings for both DVB-T and DVB-C.
Note:
Please note that the TDcH EPG management function
supports 4 days EPG informations per service independent if
the EPG is set to “Full” or “P/F”. That the EPG is available at the input source is of course a general requirement
.
The following settings are able to set up:
-
Full Actual - Full Other
All outputs will have all EIT information available, so all actual present/following, actual schedule, other
present/following and other schedule EIT are sent out with all muxes.
-
Full Actual - P/F Other
All outputs will have actual present/following and actual schedule EIT information, but only other
present/following EIT information.
-
Full Actual - No Other
All outputs will have actual present/following and actual schedule EIT information, and no other EIT
information.
-
P/F Actual - P/F Other
All outputs will have actual present/following EIT information and other present/following EIT information
only.
-
P/F Actual - No Other
All outputs will have actual present/following EIT information.
-
No Actual - No Other
No EIT information is output.
5.8.2
LCN
Assign LCN numbers to desired services. LCN and HD-LCN numbers in the range 0 - 1023 can be set.