![background image](http://html1.mh-extra.com/html/triax/tdch-16s-i/tdch-16s-i_user-manual_1160872012.webp)
TDcH Compact Headend
EN
12
•
Connect the Terr/Cable input to the corresponding output of a terrestrial or cable distribution. Make sure
that the input level are in the required level range!
•
Connect the attached main cable to the IEC connector.
•
Connect the mains cable to a mains socket with protective conductor connection. Thereby note the voltage
specified on the device.
This device has no power switch and starts immediately after connecting the operating voltage.
•
Configure the device as described in the chapter
“Installation & Easy Setup”
•
If the programming is finished, connect the RF output to the cable network.