![background image](http://html1.mh-extra.com/html/triax/tdch-16s-i/tdch-16s-i_user-manual_1160872027.webp)
TDcH Compact Headend
27
EN
Configure DiSEqC to "DiSEqC off" will result in none commands at all, hence no change at the multiswitch. So, if
changing from e.g. 2/B position to "DiSEqC off" will result in the multiswitch still set to 2/B - after a general power
failure resulting in both the multiswitch and the TDcH power cycles then will the multiswitch start up in default e.g.
1/A resulting in wrong position
→
no signal at the TDcH!
In addition to the DiSEqC settings, the menu also shows the (default) values of the (Local-Oscillator-Frequency)
LOF Low:
Local Oscillator Frequency for the low band Frequencies
LOF High:
Local Oscillator Frequency for the high band Frequencies
LOF Switch:
Border frequency between low and high band
Note:
The LOF frequencies can be adjusted to the requirements of the LNB.
5.4.4
Multiple satellite reception
To support SCR from the Satellite reception and distribution we recommend to use the following TRIAX products:
SCR LNB:
304847
SCR 2
1 SCR out
4 User bands
This LNB’s can be directly connected to one of the TDcH DVB
-S2X inputs and allows to receive 4
transponders from one satellite independent from the polarization.
SCR Multi switch:
307356
TMU 1743C
4 SCR out
12 User bands each
This multi switch supports up to 4 satellite positions with up to 16 polarizations using 4 Quatro LNB’s.
The Quattro LNBs have to support the LOF frequencies 9.75 / 10.6 GHz.
307348
TMU 943C
4 SCR out
12 User bands each
This multi switch supports
up to 2 satellite positions with up to 8 polarizations using 2 Quatro LNB’s. The
Quattro LNBs have to support the LOF frequencies 9.75 / 10.6 GHz.
318190
TdSCR 906C
6 SCR out
10 User bands each
This multi switch supports up to 2 satellite positions with up
to 8 polarizations using 4 Quatro LNB’s. The
Quattro LNBs have to support the LOF frequencies 9.75 / 10.6 GHz.
Or up to 4 satellite positions with up to 16 polarizations using Wide Band LNB’s.
Note:
The TDcH supports the following SCR standards:
- EN50494
- EN50607
If you set the DVB-S2X input to SCR the TDcH supports SCR (Satellite Channel Router) functionality and can receive
one satellite with up to four polarizations on this input. Each DVB-S2X input can be individual configured.