![background image](http://html1.mh-extra.com/html/triax/s-hd-207/s-hd-207_operating-manual_1160896032.webp)
Playback
32
- 32 -32
Overview of symbols displayed:
Indication
Meaning
►
Playback
►►
Fast forward
►►►
Very fast forward
►►►►
Maximum speed forward
●
Record
●►
Timeshift operation
◄◄
Fast rewind
◄◄◄
Very fast rewind
◄◄◄◄
Maximum speed rewind
Operating the hard disk
– setting and managing markers
During the timeshift function or playback, you can mark places on the recording. A marker is
shown as a coloured triangle in the status indicator. Press the button
F1
at the playback
position to set a marker.
You can use the button
F2
to show a list of all the markers. A recording always has the
markers
Start
and
End
.
Using
you can now select a single marker. Press the
OK
button to continue playback at
the selected marker.
When the list of markers is open, you can use the button
to assign a particular function to a
marker, so that when playback reaches this marker the function is automatically performed.
You can assign the following functions to markers:
-
Press the button
once – the marker is interpreted as a loop. When the playback
reaches a loop marker, it jumps to the previous marker. A loop marker is labelled
L
in the
list of markers. A yellow vertical line is shown in the status indicator.
-
Press the button
twice – the marker becomes a jump marker. When the playback
reaches a jump marker, it jumps to the next marker. A jump marker is labelled
J
in the list
of markers. A white vertical line is shown in the status indicator. Use jump markers, e.g. to
jump over commercial breaks.
- Press the button
three times – this marker has no special function, but can be used
during playback as place for a loop or jump.
Press the
red
button to delete the selected marker from the list. The
Start
and
End
markers
cannot be deleted.
Press the
F2
button or
EXIT
to close the list.