![background image](http://html1.mh-extra.com/html/triax/s-hd-207/s-hd-207_operating-manual_1160896018.webp)
Installation
18
- 18 -18
Installation
In the main menu, select the line
Installation
using
and confirm with
OK.
The Installation menu
will appear:
Use the buttons
to make your selection and
confirm with
OK.
Installation
– antenna configuration
Choose the required line by pressing
and enter your preferred settings with
OK
.
1) Antenna:
Contains all available satellites.
By using ◄
or ► you can select the satellite your LNB is
directed to. After pressing
OK
you can rename
the selected satellite name.
2) Antenna power
Here you can switch on/off the
supply voltage
for the LNB (◄ or ►).
3) LOW Band
The oscillator frequency for LOW
band can be fine adjusted by pressing ◄ or ►.
For directly entering the frequency press
OK
and use the numeric buttons
1-0
then.
4) HIGH Band
The oscillator frequency for HIGH band can be fine adjusted by pressing ◄ or ►.
For directly entering the frequency press
OK
and use the numeric buttons
1-0
then.
5) DiSEqC switch
If your receiver is connected to a satellite antenna system that receives
several
satellites
(multi feed antenna system) via a DiSEqC controlled switch unit:
Specify the input of the DiSEqC switch, where the selected LNB (line 1) is connected
to (◄/►).
6) Toneburst switch
If your receiver is connected to a satellite antenna system that receives
two
satellites (multi
feed antenna system): Specify the input of the A/B-Switch where the selected LNB (line 1)
is connected to (◄ or ►).
Installation
Antenna configuration
Channel search
Factory reset
Software download
Antenna configur…
Antenna
Antenna power
LOW Band
HIGH Band
DiSEqC-Switch
Toneburst-Switch
1 Astra 19.2
On
9.750
10.600
A
A