33
/52
32
Command
Function
Feedback Example
Clear[Y].
Clear the preset command [Y].
Clear FY (Y=0-9)
PWON.
Work in normal mode.
PWON
PWOFF.
Enter into standby mode and cut off the
power supply to HDBaseT receivers.
PWOFF
STANDBY.
Enter into standby mode. (Do not cut off
the power supply to HDBaseT receivers,
press other buttons or send other
commands to start.)
STANDBY
Audio/[X]:[Y].
Select HDMI audio or analogue audio
as audio source for output 1~8.
Audio/[X]:[Y]. X=1~8,
Y=0 (HDMI audio) or 1
(Analogue audio).
/%[Y]/[X]:[Z].
HDCP management command.
[Y] is for input (value: I) or output (value:
O); [X] is the number of the port, if the
value of X is ALL, it means all ports; [Z] is
for working status (value: 1 or 0).
/%[Y]/[X]:[Z]. Y=I/
O;
X=1~8 or ALL; Z=1/0
[x1]R[x2].
Transfer the IR signal from input channel
[x1] to output channel [x2].
IR: X1-> X2 (X1/
X2=1~8)
DigitAudioON[
x].
Enable HDMI audio output of port x.
X=1, 2, 3, 4, 5, 6, 7, 8, enable this
port.
X=9, enable all the 8 ports.
DigitAudio ON with [x]
x=1~8 or ALL
DigitAudioOF
F[x].
Disable HDMI audio output of port x.
X=1, 2, 3, 4, 5, 6, 7, 8, disable this
port.
X=9, disable all the 8 ports.
DigitAudio OFF with
[x]
x=1~8 or ALL
*Note: outputs depends on matrix model
