![background image](http://html1.mh-extra.com/html/triax/cgs-2-764-c/cgs-2-764-c_assembly-instructions-manual_1160867023.webp)
- 23 -
CGS-2 764 C
i
nput
symbol
r ate
, dvb
mode
In this menu set the symbol rate and the DVB mode of the desired transponder.
SYMBOL
DVB–S
Bx 4A
27500
Symbol rate:
The symbol rates of the satellite transponders can be found in the current chan-
nel table of the satellite operator, in various satellite magazines and in the
Internet.
• Use
to position the cursor under the digit to be set for the symbol rate
displayed.
• Press
to enter the respective digit of the symbol rate needed.
• Repeat the procedure by the quantity of the digits to be set.
—>
Note for
reception of transponders with
symbol rates < 7001
kSymb/s with
the integrated
double tuners A/B and C/D
:
If at the input of a tuner a symbol rate
<
7001 kSymb/s is set (e.g.
at "Single Channel per Carrier" signals), then also a transponder
with a symbol rate < 7001 kSymb/s may be set at its second tuner.
DVB mode:
The cassette recognizes the transmitted DVB mode and switches over between
the normal QPSK mode (DVB-S) and the DVB-S2 mode. Receiving stations
with DVB-S2 mode, we suggest to preset the DVB mode to shorten the time for
searching stations.
• Use the button to place the cursor under "
DVB-S
" and set the required
DVB-S2 mode with the buttons
.
• Press the button.
—> The "Input frequency" – "
FREQ
" submenu is activated.
i
nput
freQuenCy
If three dots "
…
" appear in the second line of the display, the cassette is in
the "
station search
" mode. Please wait until the process has finished.
Once the RF receiver has synchronised to the input signal, any offset to the
target frequency is displayed in MHz, e.g. "
– 1.8
".