![background image](http://html1.mh-extra.com/html/triax/cgs-2-764-c/cgs-2-764-c_assembly-instructions-manual_1160867013.webp)
- 13 -
CGS-2 764 C
5
p
rogramming
5.1 p
repar ation
• Test the software versions of the head-end station and the QAM module and
update them if necessary. The current software versions can be found on the
website "
www.triax.com
".
• Connect the test receiver to the modulator output on the QAM module
D
or to
the RF output on the output collector if it is already connected (page 11).
• Adjust the test receiver to the output channel / output frequency of the chan-
nel strip to be set.
• Switch on the channel strip (modulator) if necessary (page 18). For each chan-
nel strip, there is an status LED which indicates if the channel strip is switched
on.
Status LEDs
Channel strip A
Channel strip B
Channel strip C
Channel strip D
• Balance the output levels of the channel strips "
A
" and "
B
" and level them
to the output levels of the modulators of other modules used if the difference
in level is
≥
5.2 n
otes
on
level
set ting
In order to prevent interference within the head-end station and the cable sys-
tem, the output level of the cassette must be decreased by 10 dB compared to
the system level at 64 QAM, and by 4 dB compared to analogue cassettes at
256 QAM.