background image

 

 

- 27 - 

CGS-2 764 C

 

•  Use the   button to activate the menu of the CA module (only if Tuner "A" 

or "C" is selected).

—>  Access to this menu is only possible with installed 

CA module

 and 

inserted smart card.

 

Ca 

module

 

The menu varies according to which CA module you are using. For this rea-
son, please refer to the operating manual of your particular CA module. The 
relevant information is shown in the display of the head-end station. This may 
appear as a fixed display or as scrolling text according to display capabilities.

Bx 4A   01/05
Information *)

MENU

Bx 4A
PID Check on

CA-MENU

=>

—>  The display shows e.g.:

  Bx 4A  01/05  MENU

 

Meaning of the indicators:

 

"

Bx 4A

"  

Slot 4, tuner "

A

"

 

"

01/05

The first of five menu items is activated.

 

"

MENU

The menu of the CA module is activated.

 

*) For the explanation of further details please use the operating instructions of 

the CA module used. 

 

•  Use the 

 buttons to activate the menu desired. 

 

•  Press the   button to activate the menu.

 

•  Use the 

 buttons to select the function desired.

 

•  To set the CA module use the 

 and 

 buttons.

—>  By pressing the 

 button you can cancel the settings in the menu 

of the CA module and are returned to the "PID monitoring" – "

CA-

MENU

" menu.

 

•  All settings are saved by pressing the   button. 

—>  You will be returned to the "PID monitoring" – "

CA-MENU

" menu.

 

•  Press the   button.

Summary of Contents for CGS-2 764 C







































Reviews: