![background image](http://html1.mh-extra.com/html/triax/cg2ct-860-c/cg2ct-860-c_assembly-instructions-manual_1160866031.webp)
- 31 -
CG2CT 860 C
n
et work
i
nfor m ation
t
able
(nit)
Bx 2
off
NIT
=> Make
• To switch NIT "
on
" resp. "
off
" press the
buttons.
• Press the button to activate NIT ("
Make
").
All active modules which are able to output a NIT ("NIT modules") must be
set and ready for reception.
—> The NIT of all
"
NIT modules
"
are switched on.
—> The module fetches all the information (output frequencies, output
data rates, etc.) it needs from all the "NIT modules" in order to gen-
erate the NIT. This process may take a few seconds.
Then the NIT is generated, added and sent to all "NIT modules". The
other "NIT modules" also add this new NIT. The status of all "NIT
modules" in the NIT menu changes to "
on
".
The display shows: "
read … / copy …
".
• To switch off the new NIT ("
off
") press the button.
—>
The NITs of the other "NIT modules" will stay switched on. When
the NIT of the module is switched on again ("
on
") by pressing the
button, the previously generated NIT is added again. If you have
changed parameters in the meantime, you must first select "
Make
" to
generate a new, up-to-date NIT.
• Press the button.
—> The "Factory reset" – "
FACTORY Defaults
" main menu is activated.