![background image](http://html1.mh-extra.com/html/triax/cg2ct-860-c/cg2ct-860-c_assembly-instructions-manual_1160866018.webp)
- 18 -
CG2CT 860 C
In this case increase the output symbol rate or the QAM modulation
or remove stations from the data stream using the station filter.
QAM-Modulation:
In this menu item you can set the QAM modulation.
—> For higher QAM modulation, the output symbol rate is lowered. An
output QAM modulation of > 64 QAM places a large burden on the
cable network. Due to noise, delay and frequency response prob-
lems, reception of the converted output signal can be affected.
• Use buttons
to select the cursor position for "
QAM…
" setting.
Bx 2A
!
6900 QAM 256
QAM–MODE
POS
• Use buttons
to set the QAM modulation ("
4
" … "
256
").
Inverting the user signal:
For exceptional cases and "older" digital cable receivers, the spectral position
of the user signal can be inverted "
NEG
". Factory default is "
POS
".
• Use
to place the cursor under "
POS
".
Bx 2A
!
6900 QAM 256
QAM–MODE
POS
• Use
to set the spectral position to "
NEG
".
• Press the button.
—> The "Substitute signal in the case of an incorrect input signal" –
"
FAILURE
" submenu is activated.