![background image](http://html1.mh-extra.com/html/triax/cg2ct-860-c/cg2ct-860-c_assembly-instructions-manual_1160866023.webp)
- 23 -
CG2CT 860 C
—> All stations from the channel strip will be read, and then displayed
with name and station type.
—> If no station is found, the following message will appear in the dis-
play: "
FILTER no Service
". In this case, check the configuration of
the antenna system and head-end station, as well as the previously
adjusted settings for the module.
—> The display shows e.g.:
Bx 2A TV + 01/04
arte
Meaning of the indicators in the example:
"
Bx 2A
"
Slot 2, channel strip "
A
"
"
TV
"
TV channel type
"
+
"
The currently selected station is switched on.
"
01/04
"
The 1st of 6 stations is being displayed.
"
arte
"
Station name
Further possible terms displayed:
"
RA
"
Radio channel type
For radio stations, the background of the screen of the
connected TV or test receiver is darkened.
"
–
"
The currently selected station is switched off.
"
*
"
The star means that the TV or radio station selected is
scrambled. To enable the station, the CA module and
the appropriate smart card of the station provider are
required.
—> If a service number (e.g. "
131
") appears instead of "
TV
" or "
RA
",
this indicates that an unnamed station or an undefined data stream
is being received.
• Use the
buttons to call up the stations in sequential order, then use
to activate (indicated by "
+
") or to deactivate them (indicated by
"
–
").
—> If a station is scrambled (indication "*"), in this menu you select
whether it should be descrambled using an adequate CA module.
• Press button twice to descramble a station (indication "X").
01/04
Bx 2A
/B
TV * X