![background image](http://html1.mh-extra.com/html/triax/ccs-2-2001/ccs-2-2001_assembly-instructions-manual_1160865031.webp)
- 31 -
CCS-2 2001
o
Per ation
with
a
Ca
module
In order for this function of the CA module to be possible, stations capable of
being descrambled by the CA module you are using and your smart card must
be selected in the "Station selection" submenu (page 28).
Short-term picture loss may occur when switching between scrambled and
unscrambled broadcasts within one service (e.g. scrambled stations and un-
scrambled regional broadcasters).
Pid
monitoring
Ca
module
In this menu you can switch off the PID monitoring and configuring the CA
module (dependent on the CA module).
Bx 4
PID Check
CA
on =>
PID monitoring
By default the PID monitoring is switched on.
If particular PIDs are not descrambled the CI module is reset. Additionally
dropouts may occur if several stations are descrambled. To prevent this the PID
monitoring can be switched off.
Bx 4
PID Check
CA
on =>
• Use the
buttons to switch "
off
" or "
on
" the PID monitoring.
Configuring the CA module
• Use the
button to activate the menu of the CA module..
The menu varies according to which CA module you are using. For this rea-
son, please refer to the operating manual of your particular CA module. The
relevant information is shown in the display of the head-end station. This may
appear as a fixed display or as scrolling text according to display capabilities.
▶
Bx 4 01/03
Information *)
MENU
Bx 4
PID Check
CA
on =>
M