![background image](http://html1.mh-extra.com/html/triax/ccs-2-2001/ccs-2-2001_assembly-instructions-manual_1160865007.webp)
- 7 -
CCS-2 2001
When the head-end station is switched on, the two-line LC display shows the
software version of the control unit. To operate this cassette the software version
of the control unit must be "
V 44
" or higher. You can find the current operating
software for the control unit, the software "BE-Flash" and the current assembly
instructions on the website "www.
triax.com
".
The cassette is intended for use in CSE 3300 head-end systems.
2.5 s
oft ware
query
Control unit
If necessary, you can activate the indication of the software version of the
control unit manually:
• Press any two keys on the control unit of the head-end station simultaneously
until the display goes dark and the software version, e.g. "
V 44
" appears.
Cassette
The software version of the cassette, e.g. "
V 44
", is shown in the display after
activating the cassette (see page 16).
2.6 h
ow
the
tPs
module
works
After decoding QPSK or 8PSK -modulated signals, the demodulated data
streams can be accessed via the integrated TPS module. These data streams,
also called transport streams, contain several stations in all their components
(video, audio, data and service information), which can be changed using the
TPS module.
s
tation
seleCtion
Individual stations can be selected. This reduces the data rate and, conse
-
quently, the output symbol rate. Additionally stations of the different transport
streams can be assembled to a new transport stream.
C
hanging
the
t
r ansPort
strea m
and
orgnet-id
The transport stream ID can be changed. If the stations of two transponders are
combined into one transport streams a new identification must be allocated to
realise the channel search of the settop boxes connected without mistakes.
If the ORGNET-ID is changed a new NIT must be generated.