![background image](http://html1.mh-extra.com/html/triax/ccs-2-2001/ccs-2-2001_assembly-instructions-manual_1160865025.webp)
- 25 -
CCS-2 2001
i
nPut
Par a meters
In this menu you select the input, for which you would like to set the input pa
-
rameters in the submenus.
Bx 4
Tuner A OK
INPUT
=>
—> The indication "
OK
" serve for information:
OK - input signal is present at tuner A.
• Use the
buttons to select the input ("
Tuner A
" / "
Tuner B
"), for which
you would like to set the input parameters.
—> To skip the settings of the input parameters press the
but-
ton. The "PID monitoring" – "
CA
" main menu is activated (page 31).
• Press the
button.
—> The "LNB oscillator frequency" – "
LNB
" submenu is activated.
lnb
osCill ator
frequenCy
Set the oscillator frequency of the LNB used in this menu.
Bx 4A
/B
10600 MHz
LNB
• Using the
button the oscillator frequencies "
10600
" or "
9750
" can
be selected directly.
• To set other oscillator frequencies use the
buttons to place the cursor
under the digit of the oscillator frequency displayed to be set.
• Press
to enter the respective digit of the oscillator frequency of the
LNB used.
• Repeat the procedure by the quantity of the digits to be set.