![background image](http://html1.mh-extra.com/html/triax/ccs-2-1002/ccs-2-1002_assembly-instructions-manual_1160864036.webp)
- 36 -
CCS-2 1002
n
et work
/
oPer ator
identifiCation
In this menu, you can change the network/operator identification (CAT-ID –
C
onditional
A
ccess
T
able -
Id
entification).
Bx 4A
/B
0xDE00
CAT-ID
off
CAT is not to be changed:
• Press the
button.
—> The "Deleting a PID" – "
DROP
" menu is activated (page 37).
Changing the CAT:
The network operator e.g. requires that you set the operator ID to "2".
• Use the
buttons to position the cursor under the digit to be set.
• Use
to change the operator ID from "
0xDE00
" to "
0xDE02
".
• Use the
button to position the cursor under "
off
," then use
to
activate the new CAT ("
on
").
—> The menu display switches to "
modified
".
—> If you try to change the network/operator identification (operator
ID) of a transponder which cannot be modified, "
not modified
" ap-
pears in the display.
• Press the
button.
—> The "Deleting a PID" – "
DROP
" menu is activated.