- 35 -
CCS-2 1002
—> The "Network Information Table" – "
NIT
" menu is activated.
n
et work
i
nfor m ation
t
able
(nit)
Bx 4A
/B
off
NIT
=> Make
• To switch NIT on/off ("
on
"/"
off
") press the
buttons.
• Press the button to activate NIT ("
Make
").
—> All active cassettes which are able to output a NIT ("NIT cassettes")
must be set and ready for reception.
—> The NIT of all
"
NIT cassettes
"
are switched on.
—> The cassette fetches all the information (output frequencies, output
data rates, etc.) it needs from all the "NIT cassettes" in order to
generate the NIT. This process may take a few seconds.
Then the NIT is generated, added and sent to all "NIT cassettes".
The other "NIT cassettes" also add this new NIT. The status of all
"NIT cassettes" in the NIT menu changes to "
on
".
The display shows: "
read … / copy …
".
• To switch off the new NIT ("
off
") press the button.
—> The NITs of the other "NIT cassettes" remain switched on. When the
NIT of the cassette is switched on again ("
on
") by pressing the
button, the previously generated NIT is added again. If you have
changed parameters in the meantime, you must first select "
Make
"
to generate a new, up-to-date NIT.
• Press the
button.
—> The "Network/operator identification" – "
CAT-ID
" menu is activated.
