![background image](http://html1.mh-extra.com/html/triax/ccs-2-1002/ccs-2-1002_assembly-instructions-manual_1160864037.webp)
- 37 -
CCS-2 1002
d
eleting
a
Pid
In this menu a PID of the transport stream can be deleted.
Bx 4A
/B
PID 0x0000
DROP
off
• Use the
buttons to place the cursor under the respective digit of the
hexadecimal number of the PID to be deleted ("
0x0000
") and set the hexa-
decimal number using
.
• Use the
button to set the cursor under "
off
" and delete the PID using the
buttons ("
on
").
• Press the
button.
—> The "Renaming a PID" – "
REMAP
" menu is activated.
r
ena ming
a
Pid
In this menu you can allocate a new address to a PID retaining the complete
data content.
Bx 4A
/B
0x0000 –> 0000
REMAP
off
• Use the
buttons to place the cursor under the respective digit of
the hexadecimal number of the PID to be changed ("
0x0000
") and set the
hexadecimal number using
.
• Use the
buttons to place the cursor under the respective digit of the
hexadecimal number of the new PID ("
–> 0000
").
• Set the hexadecimal number using
.
• Use the button to set the cursor to "
off
" and rename the PID using the
buttons ("
on
").
• Press the
button.
—> The "Factory reset" – "
FACTORY Defaults
" menu is activated.