- 25 -
- 25 -
Setting the port number
• Press the
▶
button to position the cursor under the port
number e.g. ”
1234
”.
• Use the
▶
◀
/
buttons to position the cursor under the
digit of the port number displayed to be set.
• Using the
buttons set the port number wished.
Copying the settings to all IP addresses
• Pressing the
button the settings ”transmission pro-
tocol” and ”Port number” can be copied to all IP address-
es.
—> The display shows ”
copy
” for a short time.
• Press the
button.
—> The “Defining the quantity of data packets, setting
the forward error correction, setting the transmission
channel” – “
PKTS / FEC
” menu is activated.
Defining the quantity of data packets
Setting the forward error correction
Setting the transmission channel
In this menu you set the quantity of the data packets to be
transmitted, the forward error correction FEC and the trans-
mission channel. If the forward error correction is used the
data to be transmitted is encoded in a redundant way so that
the addressee can correct transmission errors.
Defining the quantity of data packets
• Using the
buttons define the quantity of MPEG data
packets in one IP data packet (”
1
” … ”
7
”).
IP 1
7 off
PKTS / FEC
Å
Ï
/
off / 10/9 … 20/19
Annex A / Annex B
copy
1 … 7