Information
24
- 24 -24
Information
Enter the main menu, there use
to select line
Information
and press
OK
.
In the upper section of the menu the channel parameters of the activated channel are
displayed.
In the lower section of the menu the signal qualities are displayed.
-
C/N
:
The further the bar turns right and the higher the dB value, the better
the signal quality.
-
Level
:
The further the bar turns right the better the reception.
Hint:
The power of the signal depends on the antenna set up and also on the currently activated
channel. Please remember this if you want adjust your antenna by controlling the signal
power.
After pressing the ◄ ► or the
yellow
button two further charts with channel, software and
hardware information are displayed. With
you can change the channel.
Use
EXIT
to leave this menu.
Teletext
Press the
TEXT
button to display the videotext of the current channel. The first site to be seen
is site number “100“.
In order to view a specific page, use the buttons
0-9
to enter the three-digit page number.
Your
input is displayed in the left corner on the screen. When the site number is input completely
the receiver starts to search the corresponding site. Because the video text sites are sent site
by site it may take some seconds un
til the required site is found. Enter “100” at any time to
return to the home page of the videotext.
You may use
to quickly page through the complete videotext section of a particular TV
channel.
If you press the
TEXT
button again you can switch into the mixed mode (background
transparent). Use the
TEXT
button to return to the normal mode.
For leaving the video text please press
EXIT
.
