Triangle Engineering Tales, User Manual

Page: 16 / 24

16
EN
Unpacking
Open the box and remove all staples, then take out the subwoofer.
If you notice any defects on any elements when unpacking, contact your dealer.
Before disposing the packaging, check that nothing is left inside.
INSTALLATION PRECAUTIONS
Before installing
Before connecting your installation, make sure all equipment is swiched off. Make sure the swich
is OFF before removing or connecting cables. Do not connect the power supply cable before
completing all connections.
Moving the unit
Always disconnect the power supply cable and the cables between any other audio components
when moving the unit. This is in order to prevent any short-circuiting or damage on plugs and
connection cables.
Before switching the unit on
Check once again that all connections are correct and that volume buttons are at the minimum.
Places to avoid
Avoid placing your enclosure near damp aeras or areas exposed to excessive sunlight and install it
in a cool place.
Recycling
Your product contains valuable materials which can be recovered or recycled.
Leave it at local point.