NOT
FO
R DI
ST
RIBUTIO
N
WI
THO
U
T T
H
E
CON
S
ENT
OF
TRIACTA PO
WER
Triacta Power Technologies PowerHawk 6320
PowerHawk 6320 Meter Installation Guide
1
PowerHawk 6320 Meter Installation Guide
This document provides general information about the PowerHawk 6320 high-density meter,
and procedures to install and start up the unit, and complete the initial configuration.
•
“System description” on page 1
•
“Pre-installation” on page 4
•
“Installation procedures” on page 6
•
“Start-up sequence for the PowerHawk 6320 meter” on page 17
•
“Regulatory Compliance” on page 22
This documentation is intended for those responsible for installing and configuring PowerHawk
meters.
Installers must be licensed electricians with knowledge of local and national safety regulations.
System description
The PowerHawk 6320 high-density meter is single-phase, poly-phase, and three-phase devices
with 20 individual meters. All PowerHawk units are designed for residential, commercial and
industrial use with a wye service. They display the power and consumption readings for each
measurement point.
PowerHawk 6320 system specifications
The PowerHawk system architecture includes:
•
single-phase, poly-phase (network) and three-phase compatiblity
•
120/240V and 120/208V configurations
•
20 individual meter points
•
local Ethernet configuration interface via PC and web browser
•
onboard modem and Ethernet ports for remote reporting
Front panel display
As shown in Figure 1, the PowerHawk 6320 has the following front panel features:
•
LCD
- displays 2 rows of 16 characters for each of the 20 meters
•
Display button
- cycles through the available information for each of the 20 meters
•
Left and right arrow buttons
- selects which of the 20 meters is on the display
Summary of Contents for PowerHawk 6320
Page 1: ...PowerHawk 6320 High Density Meter Installation Guide...
Page 31: ......
