TRI tool 301A Operation Manual Download Page 9 | Manualshive

Page: 9 / 42

background image

7

Model 301 Tube Squaring Machine

92-0630 Rev. 190612

3. GENERAL DESCRIPTION

The Model 301, Tube Squaring Machine is a lightweight portable machine. It is

designed for facing and squaring .125” to 1.102” (3.2 mm to 28.0 mm) outside

diameter tubing with an ability to handle up to .125” (3.2 mm) thick wall.
The Model 301 Tube Squaring Machine has several Motor options.

•

Integral, variable speed Air Motor.

•

Integral, variable speed 110 VAC, 500 watt Electric Motor.

•

Integral, variable speed 220 VAC, 500 watt Electric Motor.

•

Battery supported DC Electric Motor.

Precision inside diameter Collets hold the tubing round to accurately square and

face the tubing with a minimum burr.
The portable version uses a Nut to retain the Collet.
A Quick Lock Clamp System (QL) that retains the Collet is available.
This Machine accepts its own torque through the Collet clamping system.
The Cutting Head accepts Squaring Tool Bits or combinations of Squaring,

Beveling or ID deburring Tool Bits.
All the required tools for operation of the Model 301 are supplied with the

Machine or with the accessory Collet Adapters.

DESIGNATIONS FOR THE MODEL 301

Model No.

Part No. Description

301A

01-1203

Tube Squaring Machine powered by an Air Motor

301AQL

01-1322

Tube Squaring Machine with a Quick Lock attachment

powered by an Air Motor

301BDC

01-1325

Tube Squaring Machine with 14.4 V battery powered Motor

301E110

01-1205

Tube Squaring Machine with a 110 VAC Electric Motor

301E110QL

01-1323

Tube Squaring Machine with a Quick Lock attachment with a

110 VAC Electric Motor

301E220

01-1207

Tube Squaring Machine with a 220 VAC Electric Motor

301E220QL

01-1324

Tube Squaring Machine with a Quick Lock attachment with a

220 VAC Electric Motor

«
...
7
8
9
10
11
...
»

Summary of Contents for 301A











































Reviews:

No comments

Related manuals for 301A

Brand: U-Line Pages: 13

Brand: WOLFF Pages: 28

Brand: RedMax Pages: 23

Brand: Temper Pages: 16

Brand: XPOtool Pages: 4

Dolphin Generation 2 XP-005L

Brand: Xhorse Pages: 9

Brand: Vito Agro Pages: 64

Brand: Snapper Pages: 32

Brand: Circut Pages: 4

Brand: G-WEIKE Pages: 75

Brand: Wadkin Pages: 85

Brand: Maruyama Pages: 16

Brand: Maruyama Pages: 24

Brand: Maruyama Pages: 24

Brand: Maruyama Pages: 36

Brand: RASOR Pages: 15

Brand: RASOR Pages: 16

Brand: CAB Pages: 22

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands