Tri-M Systems HE104-75W, Manual

Page: 9 / 9

sales@tri-m.com Toll-free (Canada & USA) 1-800-665-5600
2013-03-14 9 Direct: +1-604-945-9565
2.5 PC/104 Bus Connector
The table below lists the pins used by the HE104-75W for power and ground on the PC/104 bus.
Pin # Signal Pin # Signal Pin # Signal Pin # Signal
A1 Not Used B1 GND C0 GND D0 GND
A2 Not Used B2 Not Used C1 Not Used D1 Not Used
A3 Not Used B3 +5V C2 Not Used D2 Not Used
A4 Not Used B4 Not Used C3 Not Used D3 Not Used
A5 Not Used B5 Not Used C4 Not Used D4 Not Used
A6 Not Used B6 Not Used C5 Not Used D5 Not Used
A7 Not Used B7 -12V C6 Not Used D6 Not Used
A8 Not Used B8 Not Used C7 Not Used D7 Not Used
A9 Not Used B9 +12V C8 Not Used D8 Not Used
A10 Not Used B10 Not Used C9 Not Used D9 Not Used
A11 Not Used B11 Not Used C10 Not Used D10 Not Used
A12 Not Used B12 Not Used C11 Not Used D11 Not Used
A13 Not Used B13 Not Used C12 Not Used D12 Not Used
A14 Not Used B14 Not Used C13 Not Used D13 Not Used
A15 Not Used B15 Not Used C14 Not Used D14 Not Used
A16 Not Used B16 Not Used C15 Not Used D15 Not Used
A17 Not Used B17 Not Used C16 Not Used D16 +5V
A18 Not Used B18 Not Used C17 Not Used D17 Not Used
A19 Not Used B19 Not Used C18 Not Used D18 GND
A20 Not Used B20 Not Used C19 Not Used D19 GND
A21 Not Used B21 Not Used
A22 Not Used B22 Not Used
A23 Not Used B23 Not Used
A24 Not Used B24 Not Used
A25 Not Used B25 Not Used
A26 Not Used B26 Not Used
A27 Not Used B27 Not Used
A28 Not Used B28 Not Used
A29 Not Used B29 +5V
A30 Not Used B30 Not Used
A31 Not Used B31 GND
A32 GND B32 GND
2.6 LED Enable/Disable
There are no jumpers on the HE104-75W to disable the LED. If the LEDs must be disabled then the
current limiting resistor can be easily removed. The HE104-75W can be factory ordered in this
configuration for OEM quantities. Please contact Tri-M sales for details.
2.7 Connector Part Numbers
Description Part Number Manufacturer Part Location
2Pos Plug, MOLEX 0.156" 09-50-8021-P MOLEX Plug for CN2
CRIMP TERMINAL, 24-18AWG .156" 08-50-0106 MOLEX Crimps for CN2