PDX 1015
PAG
_
19
ENGLISH
SETUP Menu Setting
Video Setup Page
You can change the video setting: brightness, contrast, hue,
saturation.
Audio Setup Page
7
The function is use to select standby setting: OFF, 3 HOURS,
4 HOURS
OFF: No standby
3 HOURS: No remote control and panelkey operation within three
hours into standby
4 HOURS: No remote control and panelkey operation within four
hours into standby
AUTO STANDBY
OFF
3 HOURS
4 HOURS
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
12
10
8
6
4
2
0
8
6
4
2
0
12
10
8
6
4
2
0
+6
+4
+2
0
-2
-4
-6
12
10
8
6
4
2
0
1
1
STANDBY SETTING
VIDEO SETUP
1
1
Parameters and specifications
Item
Standard requirement
Electronical parameters
Power requirements
: AC 100-240 V , 50/60 Hz
Output
VIDEO OUT
AUDIO OUT
:1.2 Vrms (1 KHz, 0 dB)
Power consumption
Operating humidity
: <10W
: 5 % to 90 %
System
Laser
:Semiconductor laser, wavelength 650 nm
Signal system
: NTSC / PAL
Frequency
response
Signal-to-noise ratio
:More than 80 dB (ANALOG OUT connectors only)
Dynamic range
:More than 85 dB (DVD/CD)
Note: Design and specifications are subject to change prior notice.
: 20Hz to 20 kHz(1dB)
Battery Parameters
Battery Specifications
：
Output
：
7.4V
Charge / Discharge Time
：
Standard charge time
：
3h ~ 4h
Storage and work circumstances
：
1. Storage circumstances Temperature Humidity
2.Work circumstances Temperature Humidity
6 months
-20 C +45 C
~
-20 C +65 C
~
65+20%
65+20%
Standard charge
Standard discharge
0 C +45 C
~
-20 C +65 C
~
65+20%
65+20%
1 week
8
P R E C A U T I O N S F O R C O R R E C T
DISPOSAL OF THE PRODUCT.
The symbol shown on the equipment indicates that
waste must be disposed of in “separate collection”
and so the product must not be disposed of together
with urban waste.
The user must take the product to special “separate waste collection centres” provided by local government,
or deliver it to the retailer against the purchase of a new product.
Separate collection of waste and subsequent treatment, recycling and disposal operations promotes the pro-
duction of equipment with recycled materials and limits negative effects on the environment and on health
caused by improper handling of waste.
Illegal disposal of the product leads to the enforcement of administrative penalties.
INFORMATION NOTE ON THE REMOVAL AND DISPOSAL OF BATTERIES
Warning: Only high-qualified personnel should perform this operation!
BATTERY REMOVAL
The appliance should not be plugged to the mains socket when performing this operation!
1. Remove the screws tightening the lower part of the appliance;
2. Select the battery and disconnect and remove the battery.
Used batteries should not be disposed of with household waste or thrown into fire or water.
Used batteries should be recycled or disposed of in separate waste collection centres.
Summary of Contents for PDX 1015
Page 27: ...PDX 1015 PAG _27 NOTE ...
